|
Patent #6273513
One Year Bumper-to-Bumper Warranty
|
BRONCO
The Clean Machines
The patented (pat. #6273513) Bronco is a major breakthrough in floor removal equipment design.
For the first time, removal rates are not dependent on a machine’s sheer size and weight. The Bronco equals or outperforms those large, heavy, expensive, awkward machines but comes in a small, compact size.
And now you have a choice of power systems in your Bronco: the super-clean electric model and the new, low-emission, propane-powered version. With either model, you’ll get the same great features including high performance with low maintenance.
The Bronco has only five drive components - a motor, two pumps and two gear motors. That’s why we can go the extra mile and extend a limited 1 year warranty.
So, before you invest in a professional grade stripper, you owe it to yourself and the success of your company to check out the revolutionary Bronco.
Removal rates, blade life and equipment maintenance vary depending on the installation materials and techniques originally used to install the floor covering. |
Propane Powered
• Powerful, low-emission 17HP Kawasaki engine
• Strip up to 15,000 sq. ft. per day
On-site training at your jobsite or facility is required.
Call us about the Bronco Leasing Plan.
See the Bronco in action!
Ask for our FREE video or cd
 
|
 aaaa
|
Battery Bronco
• 2-6 Hrs. Battery Operated...110V Cord-Powered... or Both...It’s Your Choice!
• Fast, Convenient, On-Board Charging System!
• Cord-Power plus a fully charged battery provides up to 50% or more battery life. Battery life will vary depending on material being removed.
• Non-stop Stripping When Combining Cord Power With a Fully Charged Battery
|
Physical Properties
Length: 48"-56"
Width : 29"
Height to top of seat: 48-53"
Gross Weight: 1185 lbs -2050 lbs.
Net Weight without weights: 688 lbs.
Specifications
Electric Motor: 7-1/2 hp, 220 volts, single phase, rpm 3450
Propane Motor: 18 hp Kawasaki
DC Motor: 48 V DC
On-board Charger: 110V, 15 amps
Tire Specification: 10.5"x 6"x 5" Super Solid non-marking
Top speed: 550 feet per minute
Specifications are approximate and may change without notice.
Lease Option available
Substrates
Ceramic
Direct Glue Carpet
Double Stick
Epoxy Bonded Vinyl
Hardwood
Marble
Parking Lot Coatings
Power Bond Carpet
Vinyl Sheet Goods
Vinyl Tile
Features
Electric or Propane Motor
• Quiet operation
• Little or no emissions
• Operate in confined areas
• Operate in occupied areas
• Propane motor comes with personal carbon monoxide monitor
• Free shipping within continental US
|
Low pressure hydraulic system operates at 500-700 psi nominal. This low pressure system has many benefits over conventional high pressure systems that operate at 3,000 + psi.
| • Less heat and noise generated from the hydraulic pump |
| • Longer pump life |
| • Reduced likelihood of a leak. If a leak occurs there is a much lower chance of injury to personnel from a high pressure line or fitting burst. |
| • Total of only 4.5 gallons of hydraulic oil in the entire system. |
| • No spool valves reduce the heat build up on the controls. |
|
| Rear Adjustable Suspension |
| • Able to run over debris without disengagement of the blade with floor material being removed. |
| • You keep going while the others are backing up and starting over. That is one of the reasons why the removal rates are so incredible. |
| • Suspension is adjustable for operator weight and blade condition. |
| Wash-Down Safe |
| • Motor is sealed for wash down. |
| • Electrical box and components are sealed for wash down. |
|
